Description

COMPATIBLE with most Indoor and Outdoor Boilers where wood or wood byproducts are used as fuel. There is a wide installation option that is extended to Oil / Propane / Natural Gas / Pallets or other fuels and the design supports active or passive air induction.

• The burning process mostly depends on the percentage mixture, distribution and availability of oxygen at depleted regions. Moisture, temperature and local gassing significantly alter the overall fire stability. Special proprietary dynamic algorithms and feedback improve the firing process, to deliver an overall reduction of electricity and shorten the time to achieve the target temperature.

Features & Benefits

Less waste – More Heat: The Sam Wood/Pellet Boiler Furnace Controller increases the efficiency of the burn cycle resulting in more heat output with less ash output.

Know your Furnace: The advanced analytics within the SAM Wood/Pellet Boiler Furnace Controller automatically calculates and tracks:

• Calories / Joules from burning fuel
• System Efficiency
• Consumption and waste

Automatic Process Control: The Sam controller automates the starting, re-firing and shutdown processes for wood pellet boiler furnaces when in operation.

Whats included

What is include in installation kit – Standard set :

• Controller box (controller) (control panel)
• All ordered temperature sensors for your a single, duplex or triple output contour setup with wiring and connector termination, ready to connect to Controller :
  • Single :
    • 2pc. temperature sealed sensors to sense water contour temperature, stainless steel
    • 1pc. boiler water temperature, with 1/4NPT thread, stainless steel
    • 1pc. pressure sensor 1/8NPT, stainless steel
    • 1pc. reducer 1/4NPT to 1/8NPT, stainless steel
    • 1pc. installation 1/4NPT tee, brass
  • Duplex :
    • 4pc. temperature sealed sensors to sense water contour temperature, stainless steel
    • 1pc. boiler water temperature, with 1/4NPT thread, stainless steel
    • 1pc. pressure sensor 1/8NPT, stainless steel
    • 1pc. reducer 1/4NPT to 1/8NPT, stainless steel
    • 1pc. installation 1/4NPT tee, brass
  • Triple :
    • 6pc. temperature sealed sensors to sense water contour temperature, stainless steel
    • 1pc. boiler water temperature, with 1/4NPT thread, stainless steel
    • 1pc. pressure sensor 1/8NPT, stainless steel
    • 1pc. reducer 1/4NPT to 1/8NPT, stainless steel
    • 1pc. installation 1/4NPT tee, brass
•  Power cord

Available Customization Options

Cabling length upgrade – draw your setup diagram, measure length and we can build

Stainless Steel Mounting bracket – for wall, floor, or stud mounting – call for requirements

Informatics Status Light – IP67 display furnace status via color, motion lights. Visible at day and night from a distance, allows for a quick status check. Could be mounted on a vertical or horizontal surface, comes with a 6ft wire and direct connector. If interested, call for details

Low voltage backup pack – allows to operate the safety level, when power is OFF or unstable. Available in a few models based on stored power.

Exhaust Gas analytics upgrade kit, with direct Real-Time sampling, simple DIY installation, and direct connection to the Controller. Will significantly improve burning efficiency, reduce fuel consumption and reduce exhaust pollution. This upgrade works in conjunction with the main controlling algorithm to optimize igniting, flame support, and reigniting procedures in order to reduce dead-time, fuel and power consumption. This option does require a VFD to control your air induction motor

Universal, multi-system indoor thermostat. Works and operates in conjunction with gas furnace, electric heating and intelligently optimizes the cost of heating. Programmable for optimization criteria. Room temperature, room humidity, and one heat-exchange temperature sensor. One thermostat per each air-handler required. This option is available standard with SAMCAN protocol hardware. Can be upgraded to Ethernet or WiFi options. Beige color, wall mounted – call for details.

Ethernet connection, available for special communication needs and to convert your operational environment to server based control – call for details.

SAMCAN connection protocol hardware. Need to be ordered together with an indoor thermostat. It is a robust, stable and reliable data and control network for difficult environments, where guaranteed, in-time data delivery is crucial. We offer a simple twisted pair wiring for almost all installation circumstances. It is not sensitive to temperature or environmental changes – call for details

Bluetooth, Class 1 for long distance monitoring (100m) via tablet or phone, for easy setup (available only for Android version at this time, Apple compatibility in progress) – call for details

WiFi with long range antenna provided for connection under 1 km – call for details

Heating Value per Air-Dried Cord

Heating Value per Air-Dried Cord in BTU’s (source) :