Specifications
Details
Digital sewage pump controller, scoped specifically for wastewater
Pre-wired IP67 controller for sewage and wastewater pump installations. Distinct from the generic water-pump controller by dedicated float-switch fault-awareness logic and sewage-tuned reliability features. Optional remote / wireless monitoring available for installations where silent cycling into a failure is unacceptable.
Why this controller vs. the conventional setup
- Float-switch fault awareness — detects a jammed or failed float and flags it instead of silently cycling into a sewage backup.
- Dry-run protection — stops the pump before an empty-sump run damages the impeller or seals.
- Real-time monitoring — continuous pump-operation tracking so faults surface in real time.
- IP67 enclosure — rated for sewage-adjacent wet environment.
- Operating-hour and cycle tracking — for maintenance planning and warranty.
- Optional remote / wireless monitoring — available as an add-on for lift stations and remote-site installs.
Specifications
- Form factor: pre-wired IP67 sewage pump controller
- Enclosure rating: IP67
- Application: dedicated sewage / wastewater installations — submersible or dry-pit, lift stations, septic and commercial sewage
- Float-switch logic: active fault-detection topology (vs passive continuity)
- Dry-run protection: impeller / seal protection on empty-sump conditions
- Tracking: operating hours and cycle count
- Origin: Designed and assembled in Pittsboro, NC
- Datasheet: full specifications (input voltage, pump compatibility, float-switch wiring, remote-monitoring protocol, dimensions) available on request — contact us.
FAQ
How is this different from the standard Digital Water Pump Controller?
The sewage version adds dedicated float-switch fault-awareness logic and reliability features tuned for sewage / wastewater duty cycles. For wells, irrigation, and light-water duty, see the Digital Water Pump Controller.
What lift-station configurations are supported?
The base unit covers single-pump submersible and dry-pit sewage installations. For duplex (lead/lag) lift stations, multi-float topologies, or remote / wireless reporting, contact us — specific configurations may be add-ons or custom.
Are optional remote-monitoring features extra?
Yes — the live-store $1,485 base price includes the controller; remote / wireless monitoring is available as an add-on for installs that need it.
Will this work with my existing float switches?
It supports the typical mechanical and mercury-bulb float topologies used on sewage pumps. Confirm switch count and wiring with us before ordering — we'll match the harness.
Compliance & origin
- Origin: Assembled in Pittsboro, North Carolina, USA. Components are sourced from global suppliers; final assembly, firmware, and QC happen in the NC workshop.
- Enclosure: IP67 rated for sewage-adjacent wet environment.
- Support: ticket-based support direct from the people who built the hardware — open a ticket.
- Warranty & certifications: available on request — open a ticket for the current scope.
Documentation & warranty
Full technical datasheet, installation guide, and warranty terms are available on request. Ticket-based support direct from the manufacturer in NC.